SEARCH
NEW RPMS
DIRECTORIES
ABOUT
FAQ
VARIOUS
BLOG

 
 

wondershaper rpm build for : Mandriva  2007. For other distributions click wondershaper.

Name : wondershaper
Version : 1.1a Vendor : MandrakeSoft
Release : 4mdk Date : 2005-02-11 17:22:54
Group : System/Servers Source RPM : wondershaper-1.1a-4mdk.src.rpm
Size : 0.03 MB
Packager : Mandrakelinux Team < http://www_mandrakeexpert_com>
Summary : Helps maintain interactive latency on modem/ADSL/cable
Description :
Maintain low latency for interfactive traffic at all times
This means that downloading or uploading files should not disturb SSH or
even telnet. These are the most important things, even 200ms latency is
sluggish to work over.
Allow \'surfing\' at reasonable speeds while up or downloading
Even though http is \'bulk\' traffic, other traffic should not drown it out
too much.
Make sure uploads don\'t harm downloads, and the other way around. This is a
much observed phenomenon where upstream traffic simply destroys download
speed. It turns out that all this is possible, at the cost of a tiny bit of
bandwidth. The reason that uploads, downloads and ssh hurt eachother is the
presence of large queues in many domestic access devices like cable or DSL
modems.

RPM found in directory: /vol/rzm6/linux-mandriva/official/2007.1/i586/media/contrib/release

Content of RPM  Changelog  Provides Requires

Download
ftp.icm.edu.pl  wondershaper-1.1a-4mdk.noarch.rpm
ftp.icm.edu.pl  wondershaper-1.1a-4mdk.noarch.rpm
ftp.icm.edu.pl  wondershaper-1.1a-4mdk.noarch.rpm
ftp.icm.edu.pl  wondershaper-1.1a-4mdk.noarch.rpm
     

Provides :
wondershaper

Requires :
bash
rpmlib(CompressedFileNames) <= 3.0.4-1
/bin/sh
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpm-helper


Content of RPM :
/etc/rc.d/init.d/wondershaper
/etc/wshaper.cfg
/usr/sbin/wshaper
/usr/sbin/wshaper.htb
/usr/share/doc/wondershaper-1.1a
/usr/share/doc/wondershaper-1.1a/COPYING
/usr/share/doc/wondershaper-1.1a/ChangeLog
/usr/share/doc/wondershaper-1.1a/README
/usr/share/doc/wondershaper-1.1a/TODO
/usr/share/doc/wondershaper-1.1a/VERSION

 
ICM